Blade Skinny Boy 3rd gen 2018
Waves come in all shapes and sizes. That’s why we worked hard to bring you a dedicated wave kite that is a perfect match for both Chill Jill from Brazil and Extreme Tim fromIndonesia. Now you can control how much of the enhanced depower and stability you’ll use by switching between two separate wave settings: The all-around wave –a more laid-back setting for an Instagram-worthy wave, freeride or hydrofoil session; and the ultimate wave –a hardcore setting that sacrifices just a bit of the handling in favor of mesmerizing drift and depower features that could end up in a highlight-reel maneuver.Technically speaking, the Skinny Boy features a small leading edge, a solid shape and precisely designed bridle, resulting in a kite that you can count on at any condition: cross offshore, on shore, side shore, light wind or big gusts.
- Great drift
- Enhanced Depower
- Lightning-quick turning
- Choose your own setting
Kite Sizes: 5/6/8/9/12
DAKINES senaste sele som bygger på ny teknik där man använder en ”hard back” för att öka support och stabilitet. Selen blir betydligt mindre än de mer traditionella men ger ändå mycket bättre stöd.
Du kan köpa selen antingen med vanlig fast krok eller med DAKINES slider krok för körning i vågor. Oavsett vilken modell du väljer kan du köpa den andra kroken som tillbehör om du vill ha båda.
- Adaptive Fit Composite with Texon® counter/stiffener
- Narrow profile fit
- Power Clip Lock buckle system
- Maniac sliding spreader bar complete
- Spreader bar webbing hold down strap
- Memory foam pressure point relief zones
- Dual blade hook knife
- Two side key/knife pockets with elastic loop
- Independent primary and secondary power belt
- Integrated handle and leash attachment
- Left or right side leash attachment rings
- Buckle covers/webbing keepers
XS= 28-30″ [ 71-76cm ] SB= 8″ [ 20cm ]
S= 30-32″ [ 76-81cm ] SB= 10″ [ 25cm ]
M= 32-34″ [ 81-86cm ] SB= 10″ [ 25cm ]
L= 34-36″ [ 86-91cm ] SB= 12″ [ 30cm ]
XL= 36-38″ [ 91-96cm ] SB= 12″ [ 30cm ]
HB ANTI BIAX TECH
The new BIAX technology offers an improved lightness, as well as flex and responsive features like never before. It has for effect to enhance the shape’s performances.
The Anti range represents, since its release, the antechamber to the R&D innovations on the question of Strapless kitesurfing. This board left its mark on people’s minds because it simply was the first noseless board on the Kitesurf market !
Declined in various sizes to match specific programs, its reputation is well-renowned.
Brädan finns i längderna 5.0, 5.2, 5.3 o 5.4
Endast bräda 10 700kr
Pro Pac: Fenor (Material ”PC”) + Bakre Pad, Pris: 950kr
Full Pac::Fenor (Material ”PC”) + Bakre och Främre Pad: Pris 1470kr
Full pro Pac: Fenor (Material ”Honey Comb”) + Bakre o Främre PAD: Pris 1650kr
Blade Tiny Beast 1st gen
Kite Sizes: 4m, 6m
Some people are born ready, so why let them wait? That’s exactly what got us to create the Tiny Beast, an agile kite for kids who just can’t wait to get out there.
This is not your average high winds mini-kite though. The Tiny Beast was carefully designed for light and moderate conditions, performing well from 10 knots and up. Its unique shape allows for maximized stability and effortless relaunch in lighter winds, while an increased depower level ensures the safety of the young riders.
There is no doubt the Tiny Beast is the perfect kite for any boy or girl making their first steps in the kitesurfing world. Make sure you take a good look at them now, because you might be looking at a future star.
- For kids 30kgs-55kgs
- Maximum stability
- Effortless Relaunch
- High depower level4m2 5.700SEK (kite only)
6m2 6.500SEK (kite only)
Blade Skinny Boy First gen – REA sista demoex
Making specific kites for specific disciplines is what we do best, which means it was only a matter of time before we came out with a wave dedicated kite. The new Skinny Boy is for surfers who like to ride with power and super-quick steering abilities. Whether you go out strapless or with straps, you’ll find the Skinny Boy helps you charge any wave.
• Highly Reactive and Fast Turning
• Insta-Depower Feature
• Efficient Low End Performance
• High-Performance Drift
• Quality Craftsmanship
Pris komplett med bom, pump, väska & lagningskit
9m2 11.600SEK demokörd 4 gånger. Pris nu 8900 komplett
The UniBar – 3rdGen by Blade
It’s been four years since the 2nd generation of our UniBar had set a new standard for control bars. What have we done in those four years? We listened. We observed. We took notes. We applied. And now we’re ready to present you with the most thrilling bar you have ever experienced. With the new UniBar you get the lightest bar in the market, at a ridiculous 318 grams. Pretty amazing when you think about all the exciting features it contains, such as the automatic line de-twister, a below the bar swivel and….
Forget about manually spinning the front line swivel after looping your kite. From now on all you need to do is pull in the bar and your front lines will automatically unravel. Below the Bar Swivel Having the swivel below the bar gives the UniBar better functionality, allowing the automatic line detwister to operate flawlessly, making sure your lines are correctly aligned 100% of the time.
Lightest Bar in the Market
Creating a bar that is both light and strong is such an integral part of the bar’s performance. That’s why we made our bar even lighter with a CNC aluminum center insert, totaling at a weight of 318g, the lightest bar with integrated floats in the market.
Not all kite riders were made the same. Some have long arms, some short. Some like waves, some freestyle. That’s why we made a point of designing an adjustable bar throw so you can choose the length that suits you. Not only that, we also added a magnet so that the depower strap does not dangle and will always stay in place.
Some bars ignore the physics of the human body. We chose to comply, setting the UniBar at an angle that aligns with the stance of your arms as you ride. Front-to-Back Dual Grip Layer We want our riders to be free of any limitations, so we added custom-made layer of bottom grip enhancers to make it extra comfortable throughout the ride.
Molded Bar Ends
With a bar that sets the tone for others, everything has to be perfect. That’s why the new UniBar incorporates an exclusively designed molded foam bar end that integrates with the floaters, giving the bar a smooth and comfortable feeling.
19+4m Teufelberger FL Line Set
The UniBar is equipped with the highest quality of lines available on the market – the TeufelbergerFL series which is manufactured in Austria. All bars come with adjustable 19m + 4m lines so you can choose to ride with 19m or 23m settings.
QROne key to the UniBar’s success is having the safest quick release in the industry. With 100% activation rate and less than 5kg pull at a load of over 200kgs, it’s no surprise our own design is being implemented by 5 other brands on the market.
Suicide Ring & Safety Line Swivel
The new UniBar fully supports both standard and suicide modes, activating the safety mechanism on either mode. The suicide ring is connected to a dedicated swivel that makes sure it does not dangle on endless rotations and loops.